Figure 23-2 Login Via Telnet; Figure 23-3 Main Screen Via Telnet - ZyXEL Communications ZyAIR B-5000 User Manual

ZyAIR B-5000 User's Guide
Step 4.
In the telnet window, enter the user name and user password as shown (user1 is the factory
default user name and test is the factory default user password) and press [ENTER] to see the
main screen as shown in Figure 23-3. See section 26.3 to change the user name and password.
User Name :
User Password : ****
ZyAIR-B5000 RS232 Daemon
-------------------------------------------------------------------------------
>> su
sys_info
ping
exit
-------------------------------------------------------- [ Privilege : USER ]
Command : su <password>
Message :
-------------------------------------------------------------------------------
'UP/DOWN' Move, 'RIGHT/LEFT' Select/Unselect, 'Home/End' Top/Bottom [^Q-Help]
23-2
user1

Figure 23-2 Login via Telnet

Change to superviser(root) mode
Show system information
Ping test
Disable privilidge command or disconnect

Figure 23-3 Main Screen via Telnet

Version 1.5.8.200
Accessing the ZyAIR via Telnet or Console Port