Console Overview; Console Port Connections; Accessing The Zyair Via Hyperterminal Example - ZyXEL Communications ZyAIR B-5000 User Manual

23.3 Console Overview

This section shows you how to access the ZyAIR using the console port and a terminal emulation
programme such as HyperTerminal. The console operation is set up as follows:

23.3.1 Console Port Connections

Step 1. Connect the power cord to the inline power injector and power outlet.
Step 2. Connect the "MIL-C-5015 style Ethernet cable" into the special Ethernet port on the bottom of
the ZyAIR.
Step 3.
Connect the "RJ-45 Ethernet connector into the POWER & DATA OUT port on the inline
power injector.
Step 4. Use the "MIL-C-5015 style RS232 console port cable" to connect computer COM port and the
ZyAIR console port.
Step 5.
You can now access the ZyAIR via a terminal emulator such as HyperTerminal.

23.4 Accessing the ZyAIR via HyperTerminal Example

You can use HyperTerminal to access the configuration of the ZyAIR in the same way as the Telnet
session:
Step 1. Click Start and then select Programs, Accessories, Communications, HyperTerminal.
Accessing the ZyAIR via Telnet or Console Port
ZyAIR B-5000 User's Guide
23-3