ZyAIR B-5000 User's Guide
Step 4.
Click Transfer and Receive File in the Hyperterminal window.
Step 5.
Choose the folder name where you want to save the configuration file using the Browser.
Step 6.
Set the receiving protocol as a 1K Xmodem. Click Receive.
Step 7.
Type a Filename and click OK. This name does not have to be soho.cfg, but must have a .cfg
filename extension.
The following message appears. The configuration file has now been saved on your computer.
27-4
Figure 27-2 Receive File Select Protocol
Figure 27-3 Receive Filename
Type a location for storing the
configuration file or click Browse to
look for one.
Choose the 1K Xmodem protocol.
Then click Receive.
This displays a location for storing
the configuration file.
Type a filename for storing the file
with a .cfg extension.
Then click OK.
Firmware and Configuration File Maintenance