ZyAIR B-5000 User's Guide
10.6 DHCP Host Entry
You see this screen when you select Add in the previous DHCP Parameters screen. This screen allows you
to enter the Ethernet and Internet address for your fixed host entries.
The following table describes the labels in this screen.
LABEL
DHCP Client Setting (Read Only)
Interface
Trigger DHCP
Service
10-4
Figure 10-2 Basic Configuration DHCP Parameters Edit
Table 10-2 Basic Configuration DHCP Parameters Edit
The ZyAIR acts as a DHCP client. It receives an IP address, subnet mask and default
gateway IP address from a DHCP server.
Select Disable, Wireless or Ethernet.
If you Disable this, then you must assign the ZyAIR a static IP address. When not
disabled, select the interface (Wireless or Ethernet) on which it can receive IP
address information from a DHCP server.
This displays whether or not your ZyAIR acts as a DHCP server and gives IP
addresses to the clients. The default is set to Disable.
DESCRIPTION
DHCP Parameters