Mitsubishi Electric FR-A700 Instruction Manual page 88

Connection of stand-alone option units
Inserting the CN8 connector
Make cuts in the rubber bush for leading the CN8 connector cable with a nipper or cutter knife.
Fig. 3-37: Rubber bush
Insert a connector on the MT-BU5 side through a rubber bush to connect to a connector on
the inverter side.
CN8 connector
Fig. 3-38: Connection of the CN8 connector
Clamp the CN8 connector cable on the inverter side with a wire clamp securely.
b
CAUTION:
Do not connect the MT-BU5 to a CN8 connector of the FR-A740-01800.
3 - 50
Make cuts in
rubber bush
Wire clamp
Rubber bushes
Wiring
I001348E
Insert the connector until
you hear a click sound.
I001349E