Mitsubishi Electric FR-A700 Instruction Manual page 112

Operation panel FR-DU07
Screen at powering on
The monitor display appears.
Press the PU/EXT key to choose the PU
operation mode.
Press the MODE key to choose the parameter
setting mode.
Turn the digital dial until P.161 (Pr. 161) appears.
Press the SET key to show the currently set value.
The initial value "0" appears.
Turn the digital dial clockwise to change it
to the setting value of "10".
Press the SET key to set.
Press the MODE key for 2s to show the key lock
mode.
Fig. 4-5: Operation lock
NOTE The STOP/RESET key is valid even in the operation lock status.
4 - 8
Operation
Operation
Display
PU indication is lit.
The parameter number
read previously
appears.
Flicker ... Parameter setting complete!
I001461E