Parameter List With Instruction Codes - Mitsubishi Electric FR-A700 Instruction Manual

Parameter list with instruction codes

A.5 Parameter list with instruction codes
In the initial setting, only the simple mode parameters are displayed.
Set Pr. 160 "User group read selection" as required.
Parameter Name
160
Tab. A-4:Settings of parameter 160
NOTES The parameters marked
The parameters marked with
ration even if "0" (initial value) is set in Pr. 77 "Parameter write selection".
Parameters for the option are displayed only when the option unit is installed.
The instruction codes (hexadecimal) for "read" and "write" on the right of the parameter
number are those used to set the parameter via communication. "Extended" indicates the
setting of the extended link parameter. (Refer to section 6.23 for communication.)
The symbols in the table have the following meanings:
✔: The parameter is usable in this mode
—: The parameter is not usable in this mode.
Δ: The parameter is available only during position control set by parameter 800.
Instruction
Code
Para-
Function
meter
0 00 80
1 01 81
2 02 82
3 03 83
4 04 84
Basic
functions 5 05 85
6 06 86
7 07 87
8 08 88
9 09 89
Tab. A-5: Parameter list with instruction codes (1)
A - 26
User group read selection
are the simple mode parameters.
Name
V/f Con-
0 Torque boost
0 Maximum frequency
0 Minimum frequency
0 Base frequency
0 RH
Multi-speed
0 RM
setting
0 RL
0 Acceleration time
0 Deceleration time
Electronic thermal O/L
0
relay
Initial Setting
Value Range
9999
9999 0
1
in the table allow its setting to be changed during ope-
Control Mode-based Correspondence Table
Advan-
Vector control
ced ma-
gnetic
trol flux
Speed Torque
vector
control
✔
— — —
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔
— — —
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
Remarks
Only the simple mode parameters can be
displayed.
Simple mode and extended mode
parameters can be displayed.
Only parameters registered in the user
group can be displayed.
Real sensorless
Refer
vector control
to Page
Positi-
Speed Torque
on
— — — 6-147
✔ ✔ ✔
6-168
✔ ✔
—
— — — 6-172
Δ ✔ ✔
Δ ✔ ✔
6-183
Δ ✔ ✔
Δ ✔ ✔
6-195
Δ ✔ ✔
✔ ✔ ✔
6-212
Appendix
Customer
Setting