Mitsubishi Electric FR-A700 Instruction Manual page 597

Parameter
Operation mode switching method
Switch to the external
operation mode from the
network.
Network operation
Fig. 6-203: Switching the operation mode when Pr. 340 = 0, 1 or 2
Network operation
Fig. 6-204: Switching the operation mode when Pr. 340 = 10 or 12
NOTE For switching of operation by external terminals, refer to the following:
● PU operation external interlock signal (X12 signal) (refer to page 6-423)
● PU-external operation switch-over signal (X16) (refer to page 6-424)
● PU-NET operation switchover signal (X65) (refer to page 6-425)
● External-NET operation switchover signal (X66) (refer to page 6-425)
● Pr. 340 "Communication start-up mode selection" (refer to page 6-427)
FR-A700 EC
Switching from the network
Switch to the network operation
mode from the network.
Selection of operation mode and operation location
External operation
Press
the PU to light
Press of the PU to light
Press of the PU to light
Switching from the PU
Press of
the PU to light
of
PU operation
I001202_gbE
PU operation
I001203_gbE
6 - 417