Paper Feed Roller (Tray 1) - Oki C810 Maintenance Manual

Oki Data CONFIDENTIAL

4.2.22 Paper feed roller (tray 1)

Note! When replacing the paper feed roller of the tray 1, be sure to replace the
separator of the tray 1.
(1) Turn off the printer and remove the paper cassette of the tray 1.
(2) Pressing the protrusion of the paper feed roller (large)
from its shaft.
44015503TH Rev. 1
(3) Remove the spring
(4) Warping the separator
detach the separator
outward, detach the roller
notes on attaching paper feed roller:
1. To attach a new paper feed roller, insert it onto the shaft and turn it all the way.
After attaching the roller, make sure it is not removed out of the shaft.
from the paper cassette.
until its one leg is removed out of the support of the leg,
.
Support
Leg
4. REPLACEMENT OF PARTS
Be careful not to damage
the shaded area ( ).
98 /