Table of Contents
Advertisement
ENVR8304D-8CH
6.3.2
Connection Loss
Figure 6-16
Camera: Select a camera to be configured.
Enable: Check the box to enable the Video Loss event settings for the selected camera.
Log: Check the box to record video loss events to log data.
Buzzer: Check the box to enable the buzzer when a video loss event is triggered.
Email Notify: Check the box to send email notification when a video loss event is detected.
Email operation requires valid email entered in the Email setup menu (see 6.6.2 Email).
Network Alarm: Check the box to send out a network alarm to a client PC when video loss
event occurs. This feature works with EverFocus' CMS software. You will need to configure
the Alarm Server for the NVR to send network alarms to the client PC (see 6.6.5 Alarm
Server).
Alarm Output: Select an alarm output number. When an alarm is triggered, the signal will be
transmitted through the alarm output relay.
71
Advertisement
Table of Contents
