Table of Contents
Advertisement
ENVR8304D-8CH
4.5 Sequence
The sequence function is used to display each channel in sequence mode. To enable this
function:
By Mouse: Click the Sequence button
to enter the sequential switching mode. The
NVR will display one channel at a time in full screen. The channels will be displayed in the
sequence and for the amount of time as configured in the System > Display Setting > M/T SEQ
submenu. The default setting is channels 1~8 with a dwell time of 3 seconds each – repeated.
Please refer to 6.5.2 M/T SEQ for detailed information.
4.6 Zoom
You can zoom in the camera view up to 4X and navigate the camera view using the mouse.
Figure 4-6
40
Advertisement
Table of Contents
