Connection And Installation; Mounting - EverFocus eNVP-JNN-IV-V0008 User Manual

eNVP-JNN-IV-V0008 / eNVP-JTX-IV-V0008 / eNVP-JNX-IV-V0008
Chapter
2

2. Connection and Installation

2.1 Mounting

You can mount the AI mobile NVR onto a surface inside the vehicle.
Interface
Support-Mount
The Mounting Bracket is already installed on the AI mobile NVR. To mount the AI mobile NVR
onto a surface, use the supplied 4 black screws and 8 spacers (place 2 spacers on each screw
hole).
Spacer with a cut
Mounting Bracket
Screw Hole
Screw Hole
6