Table of Contents
Advertisement
4. Type the user ID and password. Click OK.
Note:
1. The default user ID is admin and the default password is 11111111.
2. If you select more than one NVRs that have the same user ID / password, you will
be able to log in several NVRs at once.
5. To change the IP address, double-click the values in the column and type the numbers or
select an option. Click Set IP Address to save the settings.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
6. To access the NVR, highlight the NVR and click Connect to Selected IP. The Internet
Explorer window pops up.
7. The Login window pops up. Type the user ID and password to log in.
Figure 2-28
Figure 2-29
27
ENVR8304D-8CH
Advertisement
Table of Contents
