Table of Contents
Advertisement
3. Basic Connection
1
2
Mouse
2.5" HDD
1. To record videos, insert a 2.5" HDD to the HDD tray. Remember to lock the HDD Key Lock
after inserting the HDD or the recording will not start (see 2.2 Hard Disk Installation).
2. To control the system, connect a mouse or use the supplied IR Remote Control.
3. To listen to audio of video source, connect a speaker to the Audio-out RCA socket. Note that
the speaker with a (built-in) amplifier and external power is required.
4. To manage the mobile DVR over network, use a standard RJ-45 cable to connect the mobile
DVR to the network.
Note: The mobile DVRs feature Wi-Fi/3G/4G function. You can optionally connect
Wi-Fi/3G/4G module and antenna to the mobile DVR for networking.
5. To view videos, connect a monitor to the VGA port using the VGA cable supplied by the
monitor manufacturer.
6. Connect the cameras to the mobile DVR using the supplied Video Cable. Please refer to 2.4
Audio Cable / Video Cable / Power-Out Cable.
7. To power on the cameras, connect the power inputs of the cameras to the 12VDC power
outputs of the mobile DVR using the supplied Power-Out Cable, please refer to 2.4 Audio
Cable / Video Cable / Power-Out Cable.
8. Connect the audio input devices to the mobile DVR using the supplied Audio Cable. Please
refer to 2.4 Audio Cable / Video Cable / Power-Out Cable. Note that the microphone with a
(built-in) amplifier and external power is required.
9. Connect the supplied Power Harness Cable to the power supply in the vehicle for powering
the mobile DVR. Please refer to 2.5 Power Harness Cable.
Front View
3
4
Speaker
Notebook / PC
Xfleet (Client PC)
9
8
Audio Cable
Power
WAN
Supply
Audio Input
7
Rear View
7
6
DC12V Out
Video Cable
Camera
P/N: 4605EMV0402031A
5
Main Monitor
Advertisement
Table of Contents
