Table of Contents
Advertisement
Tracking : Click the Tracking button to set up the tracking function which is functional only when
the selected PTZ camera is equipped with the tracking function.
To set up the Auto Tracking function:
3.
Auto Tracking Start Point: Check the box to enable a camera position to which the camera
will return to after a tracking operation. Use the direction buttons to adjust the camera
view to a desired position where you want to set up the position as the Auto Tracking Start
Point. You can select the pan / tilt speed from the Speed drop-down list for controlling the
direction buttons. Adjust zoom, focus and Iris if necessary. Click Set to set the position as
the Auto Tracking Start Point.
Note: If the user did not set up a start point or the start point is disabled, the camera will
go back to track/monitor the initial point instead of the Auto Tracking Start Point, once
the tracked object exits in the camera's field of view.
4.
Pan/Tilt Limit: Check the box if you want to create a zone where the camera will track the
movement inside the zone only. Before clicking the Upper/Lower/Right/Left buttons, use
the direction buttons to adjust the camera view to a desired position where you want the
camera to track the movement in that zone. You can select the pan / tilt speed from the
Speed drop-down list for controlling the direction buttons. Adjust zoom, focus and Iris if
necessary. Click the Upper/Lower/Right/Left buttons to set up the Pan/Tilt limits (Left and
Right for the Pan limit; Upper and Lower for the Tilt limit).
Figure 7-24
135
ENVR8304D-8CH
Advertisement
Table of Contents
