Table of Contents
Advertisement
4.4 Display
You can display system and camera status on the live view screen. Follow the steps below:
1. Click the Display button
front panel to display the system and camera status. Click the button to choose the
desired display mode:
2. The following icons will be displayed at the top-left side of each camera stream to show
each camera's status.
Recording
Alarm
3. The following icons will be displayed at the bottom of the monitor to show the system
status.
Audio On
No network
LAN
HDD failure
4. There are four display modes, and you can click the Display button to change the display
mode: (1) Display both the camera and system status icons. (2) Display only the camera
status icons. (3) Display only the system status icons. (4) Hide both the camera and system
status icons.
on the OSD Root Menu or press the Display button on the
Playback
Fast Forward
Motion
Video loss
Audio Off
No Network
WAN
HD temp. too
high
Fast Backward
Uninstall
Alarm
Motion
Main
Call
Event
39
ENVR8304D-8CH
Back
Pause
Audio On
Video loss
Sequence
Advertisement
Table of Contents
