Table of Contents
Advertisement
Tour: You can combine up to 16 preconfigured camera positions and patterns into one long
sequence. Up to 16 Tour sequences can be set up.
To set up a Pattern Sequence:
9. Select a number from the Tour No drop-down list.
10. To set up the first position for Tour No.1, select OFF, Preset or Pattern in the Mode field.
11. Enter a Preset No. or Pattern No. in the Value field.
12. Enter a dwell time (1~99 seconds) in the Dwell Tour field that the Tour will pause at a
Preset position or after a Pattern sequence.
13. Enter a speed (1~255) at which the camera will move to the Preset position or first point of
the Pattern sequence.
14. Follow Step 3 to 5 to configure up to 16 positions for Tour No.1.
15. To configure another Tour sequences, select a number from the Tour No drop-down list and
follow Step 3 to 6 to configure up to 16 positions for the selected Tour number.
16. Click Apply to apply the settings. Click Clear to clear the current settings for the selected
Tour No.; click Default to set the Tour Sequence to Default setting; click Go to view/test the
configured Tour sequence.
To activate the Tour function on the PTZ Live View window, click the PTZ icon
Menu Bar. Click the Tour button, click on the numeric buttons to select a Tour number and then
click the Go button. The camera will move to the positions in a long sequence you have
configured. To stop the Pattern function, click the Stop button
Please refer to 7.6 PTZ for detailed instructions.
Figure 7-26
138
ENVR8304D-8CH
on the
on the PTZ Control panel.
Advertisement
Table of Contents
