Table of Contents
Advertisement
Pattern Tour :
Pattern: You are given 90 seconds to move the camera (via the PTZ buttons) to different positions
(and different zoom / focus / Iris positions). The camera then saves that sequence under the Pattern
No. you've selected. Up to 4 Patterns can be configured.
To set up a Pattern Sequence:
5. Select a pan and tilt speed from the Speed drop-down list for the camera to move to the
directions when you use the direction buttons during the configuration period.
6. Select a pattern number from the Pattern No drop-down list.
7. Click the Set button to start the 90-second configuration period. Use the direction / zoom /
focus / Iris buttons to move the camera in the desired sequence.
8. Click the Complete button again to end the configuration.
Click Clear can void the configuration for the entered Pattern No. Click Go to view/test the
configured Pattern sequence.
To activate the Pattern function on the PTZ Live View window, click the PTZ icon
Menu Bar. Click the Pattern button, click on the numeric buttons to select a Pattern number and
then click the Go button. The camera will move to the positions in the Pattern sequence you
have configured. To stop the Pattern function, click the Stop button
panel. Please refer to 7.6 PTZ for detailed instructions.
Figure 7-25
137
ENVR8304D-8CH
on the
on the PTZ Control
Advertisement
Table of Contents
