Table of Contents
Advertisement
6.7.3 Schedule
You can set up the camera recording mode by time of day on specific days of the week
and/or holidays and other days. Please note that after the configuration, you have to check
the Schedule Record box in the Record setting page to enable the schedule recording mode.
Camera (1~16): Select a camera number to change the schedule for the selected camera.
Each camera can be controlled during a 24-hour time block for Holiday (Hol), Other (Oth),
Sunday (Sun), Monday (Mon), Tuesday (Tue), Wednesday (Wed), Thursday (Thu), Friday (Fri),
or Saturday (Sat).
Time (0~23): The numbers represent the 24 hours of a day.
Time Bar: The time bar uses three different colors to distinguish each recording mode.
Gray (No Record): No recording during this time block.
Pink (Event Only): Only events are recorded during this time block.
Blue-green (Normal+Event): (Default) Normal and event recording during this time block.
There are 48 blocks on the time bar, and each block represents half hour respectively. When
moving the cursor onto the time bar, the exact time will appear at the right side of the time
bar (shown as the above figure).
Figure 6-42
101
ENVR8304D-8CH
Advertisement
Table of Contents
