Table of Contents
Advertisement
7.2 Install JAVA Runtime
You need to install the latest JAVA software for stable operation.
1. When first connecting to the NVR's IP address, the following dialog will show up if you
didn't install the JAVA software or its latest version on your computer.
2. Please click Update to go to the JAVA website http://www.java.com/en/, and
download the latest version of the JAVA software.
3. After installation is completed, connect the NVR's IP address again and the yellow bar
may pop up on the top of the window. Please click it to run the JAVA application.
4. If there is an alert dialog popping up, please go to the Control Panel > JAVA Control
Panel to change settings.
5. Click Advanced tap on the top of the window, and scroll to "Mixed code (sandboxed vs.
trusted) security verification", and select the Enable – hide warning and run with
protections.
6. If you can't find the JAVA in the Control Panel, please go to Program Files > Java > jre7 >
bin and double-click the javacpl (JAVA Control Panel). Then, configure the setting as
described in the step 5.
Figure 7-4
Figure 7-5
121
ENVR8304D-8CH
Advertisement
Table of Contents
