Table of Contents
Advertisement
ENVR8304D-8CH
4.2 Layout Switching
The NVR have 4 screen division types available. The seven layouts are shown as below:
Figure 4-4
To change layout, follow the steps below:
By mouse: Right-click to bring up the OSD Root Menu and click the Layout icon. Click on the
desired layout.
By front panel: Press a desired Screen Layout button on the front panel of the NVR. To display
a channel in full-screen, press the channel buttons on the front panel.
4.3 Channel Switching
You can switch the selected camera to a specific channel. Follow the steps below:
1. On the live view screen, select a camera, the selected camera will be highlighted with a
red frame.
2. Right-click to display the OSD Root Menu.
3. Click the Channel icon
, the Channel Bar appears.
Figure 4-5
4. Select a channel, the selected camera will be switched to that channel.
38
Advertisement
Table of Contents
