Table of Contents
Advertisement
3. Basic Connection
IP Cameras
Web Remote
EverFocus CMS
Client
Grounding
1. Use a standard RJ-45 CAT5 Ethernet cable to connect the NVR to the network.
2. To listen to the audio from IP cameras or remote sites, connect speakers to the audio output.
Note that the speakers with a (built-in) amplifier and external power supply are required.
3. Connect microphones to the audio input ports to transmit audio from the NVR to the remote
sites (Web browser of NVR, eFVMS App or EverFocus CMS). Note that the microphones with
a (built-in) amplifier and external power supply are required.
4. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or
VGA cable supplied by the monitor manufacturer.
5. Optionally connect a mouse to the NVR to control the system.
6. Use the supplied Power Cord to connect the NVR to the power outlet.
2
1
Audio output
e.g, loudspeaker
Network
CVBS Output
4
4
3
Audio input
Monitor
Monitor
e.g, MIC
( HDMI 1 )
(VGA)
Alarm input / output
device
AC power
6
4
RS485
12VDC output
5
Monitor
Mouse &
( HDMI 2 )
USB Storage
5
Power On/Off
Advertisement
Table of Contents
