Table of Contents
Advertisement
5. Search and Playback
You can use the Quick Playback function to play back the recordings start from the
pre-configured time or use the Search functions to search for the desired recordings for playing
back.
5.1 Quick Playback
To start using the Quick Playback function, follow the steps below:
1. To set up the start time of the playback recording, check the Quick Playback box in the
Playback setting page (OSD Root Menu > Configuration > Record & Playback > Playback)
to enable the configured time in the field below.
2. Enter the desired time for playing back the recording. Take 60 seconds for example, if the
current system clock time is 17:35:00, the start time for the playback recording will start
from 17:34:00 (60 seconds ago from 17:35:00).
3. On the Live View Window, select a desired camera or select all channels, right-click to
bring up the OSD Root Menu, and then click the Playback button
4. The recording has been playing back and the Playback Bar appears on the bottom of the
screen.
Figure 5-1
44
ENVR8304D-8CH
Chapter
5
.
Advertisement
Table of Contents
