Chapter 7—Commands
UI – Enable Prompts/Code Page Inquiry
This command will cause the printer to enable prompts to be
Description
sent to the host and to send the currently selected code page to
the host through the RS-232 or USB port.
Syntax
UI
The printer will send information on the currently selected code
page back to the host in the following format:
UIp
Parameters
p
1
p
2
p
3
Remarks
The KDU (Keyboard Display Unit) automatically sends this
command each time power is applied. The UI command is
disabled by removing power from the printer for 60 seconds.
Example
UI↵
UI80,001
I
and
Also see
102
Intermec EasyCoder ESim v4.00—Programmer's Reference Manual
p
,p
1
2
3
Number of data bits.
Code page.
Country code.
U
commands.
:Enables prompts from host and
returns current code page, for example