Fuzzy Inference Development Support System - NEC PD78081(A) User Manual

B.2 Fuzzy Inference Development Support System
FE9000/FE9200
Fuzzy Knowledge Data
Creation Tool
FT9080/FT9085
Translator
FI78K0
Fuzzy Inference Module Part Number:
FD78K0
Fuzzy Inference
Debugger
Remark of the part number differs depending on the host machine and operating system used. Refer to
the table below.
S FE9000
S FT9080
S FI78K0
S FD78K0
S FE9200
S FT9085
S FI78K0
S FD78K0
APPENDIX B
This program supports input of fuzzy knowledge data (fuzzy rule and membership function),
editing (edit), and evaluation (simulation)
FE9200 operations on Windows.
Part Number: S FE9000 (PC-9800 series)
S FE9200 (IBM PC/AT and their compatible machines)
This program converts fuzzy knowledge data obtained by using fuzzy knowledge data preparation
tool to RA78K/0 assembler source program.
Part Number: S FT9080 (PC-9800 series)
S FT9085 (IBM PC/AT and their compatible machines)
This program executes fuzzy inference by linking fuzzy knowledge data converted by translator.
S FI78K0 (PC-9800 series, IBM PC/AT and their compatible machines)
This software supports evaluating and adjusting fuzzy knowledge data at hardware level by using
in-circuit emulator.
Part Number: S FD78K0 (PC-9800 series, IBM PC/AT and their compatible machines)
Host Machine
5A13 PC-9800 Series
5A10
Note The task swap function is not available with this software through the function is
provided in MS-DOS version 5.0 or later.
Host Machine
7B13 IBM PC/AT and their
7B10 compatible machines
EMBEDDED SOFTWARE
OS
MS-DOS
(Ver. 3.30 to 6.2
OS
Refer to A.4
Medium
3.5-inch 2HD
Note2
) 5-inch 2HD
Medium
3.5-inch 2HC
5-inch 2HC
245