Relation Between Main System Clock And Baud Rate - NEC PD78081(A) User Manual

The baud rate transmit/receive clock generated is either a signal scaled from the main system clock, or a signal
scaled from the clock input from the ASCK pin.
(a) Generation of baud rate transmit/receive clock by means of main system clock
The transmit/receive clocks generated by scaling the main system clock. The baud rate generated from
the main system clock is found from the following expression.
[Baud rate] =
where, f
f
n
k
Table 11-3. Relation between Main System Clock and Baud Rate
Baud
Rate
MCS=1
(bps)
BRGC Set Value Error (%) BRGC Set Value Error (%) BRGC Set Value
75 –
110 06H
150 00H
300 E0H
600 D0H
1200 C0H
2400 B0H
4800 A0H
9600 90H
19200 80H
31250 74H
38400 70H
76800 60H
Remark MCS: Oscillation mode selection register (OSMS) bit 0
146
CHAPTER 11 SERIAL INTERFACE CHANNEL 2
f
XX
[Hz]
n
2 (k+16)
: Main system clock oscillation frequency
X
: Main system clock frequency (fx or fx/2)
XX
: Value set in TPS0 to TPS3 (1
: Value set in MDL0 to MDL3 (0
fx=5.0 MHz
MCS=0
00H
0.88 E6H
1.73 E0H
1.73 D0H
1.73 C0H
1.73 B0H
1.73 A0H
1.73 90H
1.73 80H
1.73 70H
0 64H
1.73 60H
1.73 50H
n 11)
k 14)
MCS=1
Error (%) BRGC Set Value Error (%)
1.73 0BH 1.14
0.88 03H –2.01
1.73 EBH 1.14
1.73 DBH 1.14
1.73 CBH 1.14
1.73 BBH 1.14
1.73 ABH 1.14
1.73 9BH 1.14
1.73 8BH 1.14
1.73 7BH 1.14
0 71H –1.31
1.73 6BH 1.14
1.73 5BH 1.14
fx=4.19 MHz
MCS=0
EBH 1.14
E3H –2.01
DBH 1.14
CBH 1.14
BBH 1.14
ABH 1.14
9BH 1.14
8BH 1.14
7BH 1.14
6BH 1.14
61H –1.31
5BH 1.14
— —