13.2 Standby Function Operations
13.2.1 HALT mode
(1) HALT mode set and operating status
The HALT mode is set by executing the HALT instruction.
The operating status in the HALT mode is described below.
Clock generator
CPU
Port
8-bit timer/event counter 5, 6
Watchdog timer
A/D converter
Serial interface
External interrupt request
CHAPTER 13 STANDBY FUNCTION
Table 13-1. HALT Mode Operating Status
Item
Can be oscillated. Supply to the CPU clock is stopped.
Operation stops.
Status before HALT mode setting is held.
Operable.
HALT Mode Operating Status
195