Table of Contents
Advertisement
A Bluetooth headset must be paired with the FortiFone-60b Bluetooth module before it can be connected
(activated). Up to five (5) headsets may be paired with the FortiFone-550i at one time. Only one headset
can be used at a time. Once paired, the phone can be placed on and off hook using a compatible Bluetooth
headset.
To pair and connect a new headset with the FortiFone-550i:
•
Press the
button.
•
Press 3 to access the Phone Settings menu.
•
Press 1 2 to access the Bluetooth menu.
•
Press 1 to access Headset Management.
•
Press the Search softkey. The IP phone will search for nearby
Bluetooth headsets.
•
Select a Bluetooth headset from the list of headsets using the Down
softkey, and select the Select softkey.
•
When the Enter PIN Code message displays, input the PIN
associated with the headset and press the OK softkey. If a valid PIN
is entered, it will show Headset Connected. Please refer to your
headset's user guide for the PIN code.
•
Press the
button to exit the configuration session.
Bluetooth
Headset Status Indicators
Bluetooth icon, indicates the optional Bluetooth module is properly installed with no headsets paired to
the phone. When blinking rapidly, the FortiFone-550i is searching or attempting to pair with a headset.
Bluetooth paired icon, indicates one or more (maximum 5) headsets are paired with the module but
none are active. When blinking rapidly, the FortiFone-550i is attempting to pair or connect a
headset.
Bluetooth connected icon, indicates a headset is connected to the FortiFone-550i. When blinking
rapidly, the FortiFone-550i is searching or attempting to pair or disconnect a headset. When
blinking slowly, the Bluetooth headset is in use.
Connecting or Disconnecting a Paired Headset
When one or more headsets are paired with the FortiFone-550i phone, the headset must be connected
(activated) prior to use. When it is desired to change the active headset to an alternate headset, the
presently active headset must be disconnected (deactivated) prior to connecting the new headset.
The following procedure describes the steps required to connect or disconnect a headset that is already
paired to the FortiFone-550i.
To connect a paired headset and disconnect an active headset:
•
Press the
button.
•
Dial 3 to access 3. Phone Settings, then dial 12 to access 12. Bluetooth.
•
Dial 1 to access 1. Headset Management to display a list of paired headsets.
•
Select a Bluetooth headset from the list of paired headsets using the navigation keys.
3 2
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E U S E R G U I D E
FortiFone-550i screen
FortiFone-550i screen
FortiFone-550i screen
Advertisement
Table of Contents
Troubleshooting
