To unlock your phone:
1. Tap the icon at the top of the screen.
2. Enter the PIN to unlock the phone.
3. The Admin password may also be used to unlock the phone.
Bluetooth
Bluetooth can be enabled or disabled. This requires the use of a supported Bluetooth adapter.
WiFi
WiFi can be enabled or disabled. This requires the use of a supported WiFi adapter.
Power saving
The Power Saving feature is used to turn off the backlight and screen to conserve energy.
The following options are available:
• Power Saving: enable or disable the feature.
• Monday–Sunday: configure the office hours. This uses a 24 hour clock.
• Office Hour Idle Timeout: configure the amount of minutes the phone will wait before timing
out during office hours. Values between 1-960 are accepted.
• Off Hour Idle Timeout: configure the amount of minutes the phone will wait before timing out
during off hours. Values between 1-10 are accepted.
• User Input Extension Idle Timeout: configure the amount of minutes to wait after having used
the phone before timing out. Values between 1-30 are accepted.
Advanced Settings
The admin password to enter the advanced settings is 23646.
Accounts
The Accounts section contains parameters to allow the phone to register to a SIP server or
PBX. Contact your administrator before proceeding.
The following fields can be configured:
• Activation: enable or disable the account. Enabled accounts will try to register using the
configured settings.
• Label: the name of the account.
• Display Name: the caller ID that will be displayed when calling other phones. When
connected to a FortiVoice system, the caller ID information will be configured in the
web-based interface.
• Register Name: the user name used to authenticate with the SIP server or PBX.
• User Name: the phone number or extension number of the account.
• Password: the password used to authenticate with the SIP server or PBX.
• SIP server1: the IP address or FQDN of the SIP server or PBX.
• SIP server2: the IP address or FQDN of the secondary SIP server or PBX.
• Outbound Status: enable or disable the use of an outbound proxy.
Configuration Overview
Page 12
FortiFone User Guide