Table of Contents
Advertisement
Proxy Port
The Proxy Port defines the UDP port number employed for SIP signaling transport. In common practice, the
port number 5060 is used.
To change the Proxy Port number:
•
Press the
button, then 2. SIP Configuration, then 1. Line Configuration.
•
Enter the line button number or move the cursor using the Down softkey and press the Select softkey
to select a line.
•
Select 2. Proxy Port.
•
Input the Proxy Port number using the dial pad and press the OK
softkey to save your entry.
Changing the Proxy Port requires a reboot of the phone. When you exit the menu, you will receive a reboot notice.
Display Name
When assigned, the Display Name is used in SIP calls as the Caller ID name.
To enter the Display Name:
•
Press the
button, then 2. SIP Configuration, then 1. Line Configuration.
•
Enter the line button number or move the cursor using the Down softkey and press the Select softkey
to select a line.
•
Select 3. Display Name.
•
Input the Display Name using the dial pad and press the OK softkey
to save your entry.
To enter alphanumeric characters, select the Mode softkey.
User Name
A User Name (extension or phone number) is required for proper operation and must match the user ID or
account assigned in the SIP server. This is usually the number dialed to reach this line on the phone.
To enter the User Name:
•
Press the
button, then 2. SIP Configuration, then 1. Line Configuration.
•
Enter the line button number or move the cursor using the Down softkey and press the Select softkey
to select a line.
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E U S E R G U I D E
FortiFone-550i screen
FortiFone-550i screen
2 1
Advertisement
Table of Contents
Troubleshooting
