Table of Contents
Advertisement
Line based parameters
•
Proxy Address: The IP address or FQDN of the phone system, SIP server or SIP proxy.
•
Proxy Port: The server port for incoming SIP requests and outgoing responses.
•
Display Name: The name used for outgoing Caller ID. The display name assigned for Line 1 also
displays on the LCD display when idle.
•
Name: The name (phone number) used during registration. The name is generally the telephone
number or the SIP user ID assigned by the administrator or service provider.
•
Authentication Name: The user ID for authentication of the line with the phone system or SIP server/
service.
•
Authentication Password: The password for authentication of the line with the phone system or SIP
server/service.
•
Line Type: The type of line. Private, Shared (BLA), or DSS line.
•
BLA Primary Address: If the line is set to BLA, enter the IP address or FQDN of the server providing
BLA status to the phone.
•
Extension for DSS: The extension number associated with the line when the type is DSS. Do not enter
an extension number unless the Line Type is set to DSS.
•
Ring Type: Sets the ring tone for incoming calls on the line. The Ring Type can be Set as Default,
Ringer Off or Ring type 1 to 4, 101 to 105 or 201 to 205. The default ring is configured under the
Phone Settings menu.
•
Delayed Ring: Delays the audible notification (ring) for a line. The delay is set in 1-second increments
from 0 (no delay) to 10 seconds.
•
Auto Answer: If enabled, the phone will automatically enter speakerphone mode for incoming calls on
this line.
•
Registration Status: Shows the registration status of the phone. Refresh the page if it doesn't match
the status indicated on the phone.
General Parameters
•
Outbound Proxy Address: The IP address or FQDN of the outbound proxy server to receive SIP requests
in place of the line-based Proxy Server.
•
Outbound Proxy Port: The port of the outbound proxy server.
•
Backup Proxy Address: The IP address or FQDN of the backup proxy server, used when the connection
with the primary proxy times-out.
•
Backup Proxy Port: The port of the backup proxy server.
•
Domain: The domain for SIP service when the service provider desires to use a specific SIP domain.
•
VMS Address: The address (IP or phone number) of the Voice Mail Server.
•
Proxy Registration: Enables SIP registration to the proxy. This parameter is ignored if an Outbound
Proxy Address is not defined.
•
Registration Timer: Sets the interval (in seconds) between SIP registration renewal attempts.
•
Local UDP Port: The UDP port used on the LAN for sending and receiving SIP packets.
•
Local TCP Port: The TCP port used on the LAN for sending and receiving SIP packets.
•
Local TLS Port: The TLS port used on the LAN for sending and receiving SIP packets.
•
TCP Port: The TCP port used on the LAN for sending and receiving SIP packets.
•
TLS Port: The TLS port used on the LAN for sending and receiving SIP packets.
•
Transport Mode: The packet transport mode for voice traffic. UDP is most widely used by most
services. FortiVoice phone systems use UDP.
•
Start RTP Port: The starting port for used for Real-time Transport Protocol (voice) packets.
•
SRTP: Enable if required by the system or service provider.
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E U S E R G U I D E
4 7
Advertisement
Table of Contents
Troubleshooting
