Authentication User Name; Authentication Password; Registration Status - Fortinet FortiFone User Manual

Authentication User Name

A user name is required to authenticate a line.
To assign the Authentication User Name:
• Press the
• Select 1. Line Configuration then press the OK button.
• Select 5. Auth. Username then press the OK button.
• Input the Authentication User Name, as is specified in the SIP server, using the dial pad and
press the OK button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
Changing the Authentication User Name requires a reboot of the phone. When you exit the
menu, you will receive a reboot notice. Press the OK button to reboot. The IP phone must
reboot to utilize the new values entered.
To enter alphanumeric characters select the
for Dial Pad Mode" on page 61

Authentication Password

Authentication of the line with the SIP call server requires an Authentication Password in
conjunction with the User Name.
To assign the Authentication Password:
• Press the
• Select 1. Line Configuration then press the OK button.
• Select 6. Auth. Password then press the OK button.
• Input the Authentication Password using the dial pad and press the OK button to save your
entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
Changing the Authentication Password requires a reboot of the phone. When you exit the
menu, you will receive a reboot notice. Press the OK button to reboot. The IP phone must
reboot to utilize the new values entered.
To enter alphanumeric characters select the
for Dial Pad Mode" on page 61

Registration Status

The status of the line registration with the SIP call server can be viewed from this menu. The
status is displayed as OK, NOK (Not registered) or undefined (not assigned).
To view the Registration status for a line:
• Press the
• Select 1. Line Configuration then press the OK button.
• Select 7. Reg. Status to view the status.
• The status is actually shown next to the menu title.
• Move to another parameter with the navigation buttons and continue the session or press
the
Personalizing your Phone
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
for the character mapping of dial pad digits.
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
for the character mapping of dial pad digits.
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
Page 14
button. Refer to "Appendix B. Character Table
button. Refer to "Appendix B. Character Table
FortiFone™ User Guide for FON-260i