Table of Contents
Advertisement
•
Access Code Prefix: To simplify dialing from the Phonebook or Call Logs, enter a hunt group (9, 81-88)
that you would like the phone to use as a prefix to place calls using the specified hunt group. If direct
line access is enabled for the extension, then leave blank.
•
Call Forwarding: is not supported directly by the FortiVoice phone. Call forwarding is configured in
the FortiVoice system for busy, no answer and DND conditions for the extension.
•
Direct Call (Hotline/Warm-Line): When used with the FortiVoice system, the feature is controlled by
the configuration in the software for this extension. No configuration is required.
•
Direct Call: when enabled, places a call to a predefined destination automatically when the phone
goes off hook.
•
Direct Call Number: defines the destination for a direct call.
•
Direct Call Timer: sets a delay timer for Warm-Line operation. The timer specifies the period
before placing a direct call. The timer supports 1 second increments from zero (0) to ten (10)
seconds. For Hotline operation, set the timer to zero (0) seconds.
To modify parameters on the Call Preferences screen:
•
Select the desired parameter and enter or select the new values.
•
When complete, select the Save button to save the new values to the phone.
DIAL PLAN
The phone incorporates a dial plan, which monitors the user-dialed digits for patterns matching the dial plan
number. If a match occurs, the phone modifies the digits and processes the call using the configured script
in the dial plan. The phone supports a digit map plan or routing table plan. If used with the FortiVoice
system, then these maps are automatically generated.
Routing Table
Up to fifty (50) dial plan numbers may be defined in the Routing Table. Specific entries for the Routing
Table are:
•
Number: The digit pattern to match with the user-dialed digits.
5 0
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E U S E R G U I D E
Advertisement
Table of Contents
Troubleshooting
