Call Preferences - Fortinet FortiFone-450i User Manual

When complete, select the Save button to store the new values to the phone.
The MAC address is fixed and cannot be modified.
The IP address, subnet mask, etc. can only be changed if the static Network Mode is assigned.
Changing any values on the LAN page requires a reboot.

CALL PREFERENCES

Most of the call preference parameters can be altered according to the user's requirements.
Call Preferences
• Anonymous Call Block: When enabled, the phone blocks incoming calls with an anonymous Caller ID.
• Call Waiting Function: When enabled, the phone will accept additional calls and notify the user
visually of the incoming call while in a conversation. If disabled, no additional calls are accepted and
the system will follow the busy response configuration.
• Call Waiting Tone: When enabled, a tone is played to the user along with Caller ID information to
announce the new call.
• Call Hold Ringback: When enabled, the phone rings if the user has taken a 2nd call then terminated
the call with another caller still on hold.
• Message Waiting Tone: When enabled, a stutter dial tone is played when first going off-hook and a
new message is waiting. The visual LED notification is always enabled for voicemail notification.
• Auto Answer: When enabled, it will automatically activate the speakerphone or headset when an
incoming call is received.
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E U S E R G U I D E 4 9