Table of Contents
Advertisement
•
To configure another parameter, press the Back softkey to continue
or press the
button to exit the configuration menu.
Headset Auto Mode
The FortiFone-450i/FortiFone-550i supports the use of headsets that
have a standard RJ22 jack. With Headset Auto Mode enabled, all calls
automatically use the headset when engaging lines, redial, speed dials etc.
To enable Headset Auto Mode:
•
Press the
button, then select 3. Phone Settings, then 4. Headset Auto Mode.
•
Press the On softkey to enable the Headset Auto Mode or press the Off softkey to disable the Headset
Auto Mode.
•
To configure another parameter, press the Back softkey to continue
or press the
button to exit the configuration menu.
Flexible Key Setting
The flexible keys can be programmed with to access one of several functions. They include Line
Appearance, Extension Appearance, Queue Appearance, Phone Book access, System and Personal Speed
Dial, Park, Unpark, Call Pickup (any or specific extension), Intercom Page, Group Page and Overhead Page.
These keys are configured via the FortiVoice management software except for setting a key for Speed Dial
use. This can be programmed via the phone interface or phone's web interface.
Note: Local settings will be overridden by the FortiVoice settings when a configuration file is downloaded to
the phone if the key was not configured by the administrator as User Defined.
Time Configuration
Within the Time Configuration menu, the IP Address or FQDN of the desired Simple Network Time
Protocol (SNTP) server and the local time zone are defined. In addition, Daylight Saving Time (DST) is
enabled. These settings are all automatically configured by the FortiVoice phone system and do not
require manual configuration.
Speed Dial Number
The FortiFone-450i/FortiFone-550i phone includes a Directory Phone Book of Speed Dial numbers that
supports up to 80 entries. Each phone book record includes a speed dial number consisting of two (2)
digits. Dialing the speed dial number (00–79) then pressing the Dial softkey, places a call using the
contact information from the associated phone book record.
To enable/disable Speed Dial Number operation:
•
Press the
button, then select 3. Phone Settings, then 8. Speed Dial Number.
•
Press the On softkey to enable the Speed Dial Number, or press the
Off softkey to disable the Speed Dial Number.
•
To configure another parameter, press the Back softkey to continue
or press the
button to exit the configuration menu.
When enabled, dialing an empty Speed Dial Number terminates the call and the LCD will show Disconnected.
3 0
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E U S E R G U I D E
FortiFone-550i screen
FortiFone-550i screen
FortiFone-550i screen
Advertisement
Table of Contents
Troubleshooting
