Installing The Fortifone-450I/Fortifone-550I; Connecting The Ip Phone - Fortinet FortiFone-450i User Manual

Bluetooth paired icon, indicates one or more (maximum 5) headsets are paired with the module but
none are active. When blinking rapidly, the FortiFone-550i is attempting to pair or connect a
headset.
Bluetooth connected icon, indicates a headset is connected to the FortiFone-550i. When blinking
rapidly, the FortiFone-550i is searching or attempting to pair or disconnect a headset. When
blinking slowly, the Bluetooth headset is in use.
INSTALLING THE FORTIFONE-450i/FORTIFONE-
550i

CONNECTING THE IP PHONE

The figure below shows the cable connections for your IP phone. The LAN and desktop PC connections
employ standard Category 5 cables terminated with RJ-45 connectors. The FortiFone-450i/FortiFone-550i
supports PoE (Power over Ethernet) in accordance with the IEEE-802.1af Class 2 standard. When connected
to a PoE compliant LAN port, the IP Phone derives power from the port. If the LAN port does not support
PoE, use the AC/DC adaptor. The handset connects to the base with the coiled handset cord.
Figure 2: IP phone connections
1 0 F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E U S E R G U I D E