Delayed Ring
The phone can delay when the audible ring tone is played for incoming calls by up to 10
seconds. To configure the Delayed Ring option:
•
Press the
button, then select 3. Phone Settings then 2. Ring Settings.
•
Move the cursor to Line 1 Settings using the Down softkey and press the Select
softkey. Repeat for Line 2.
•
Press
or move the cursor to 2. Delayed Ring Timer using the Down softkey and
press the Select softkey.
•
Enter the delay time as 0 to 10 seconds in 1-second
increments. 0 provides no delay; the ring signal
is immediate.
•
Press the OK softkey to save the delayed
ring setting.
•
To configure another parameter, press the Back
softkey to continue or press the
Disable Ringer
The FortiFone-450i/FortiFone-550i can be programmed not to ring when an incoming call is
received. It will still light up the LCD, light up the Incoming Call Indicator and show the
Caller ID.
To disable the ringer:
•
Press the
button, then select 3. Phone Settings, then 3. Disable Ringer
•
Press the Yes softkey to turn the ringer off, or press
the No softkey to leave the ringer enabled.
•
To configure another parameter, press the Back
softkey to continue or press the
the configuration menu.
Headset Auto Mode
The FortiFone-450i/FortiFone-550i supports the use of headsets that have a standard RJ22
jack. With Headset Auto Mode enabled, all calls automatically use the headset when
engaging lines, redial, speed dials etc.
To enable Headset Auto Mode:
•
Press the
button, then select 3. Phone Settings, then 4. Headset Auto Mode.
1 6
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E S T A R T G U I D E
FortiFone-550i
button to exit the configuration menu.
button to exit
FortiFone-550i