Resetting The Sipi - Avaya S8400 Installing And Configuring

Resetting the SIPI

1. Type reset and press Enter
Answer Y to the warning.
Note:
Resetting the SIPI terminates the administration session. If further administration
Note:
is required, start a new telnet session.
Note:
Control network settings (IP address, subnet mask, and gateway) become
Note:
effective when you exit the IPADMIN session.
2. Disconnect the laptop from the faceplate.
3. Check the LCD. Verify that it has an I P with a filled-in V that shows at the bottom. For
more information, see
Figure 4: SIPI LED display for static address
Figure notes:
1. SIPI has a static IP address
Installing and Configuring the Avaya S8400 Media Server
Figure 4.
1
2
2. SIPI has connectivity and an IP address
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
Resetting the SIPI
53
February 2006