Chapter 1: Introduction
To configure the media server, use the Avaya Installation Wizard. To configure gateways and
other hardware components, use two administration interfaces:
Maintenance Web Interface
●
Command line interface, directly through, secure shell (SSH), telnet, or a terminal
●
emulation program such as Avaya Native Configuration Manager.
You are not required to install the media server before the port networks (media gateways);
however, the license file allows only 30 minutes to "see" the administered and connected IP
Interface (SIPI) circuit packs.
The following information is included in this installation procedure:
Pre-installation: before going on site
●
Configuration of the SNMP modules in the UPS
●
Media server configuration
●
IP interface translations
●
IP interface configuration
●
Post-installation administration
●
Installation verification
●
Media server access
●
Installation troubleshooting
●
Audience
This documentation is for the following people tasked with installing and configuring the media
server components:
Trained field installation and maintenance personnel
●
Technical support personnel
●
Authorized Business Partners
●
Installing and Configuring the Avaya S8400 Media Server
on page 9
on page 35
on page 43
on page 49
on page 57
on page 63
on page 73
on page 83
on page 25
7
February 2006