Connecting To The Media Server Directly - Avaya S8400 Installing And Configuring

Connecting to the media server directly

To access the media server directly, use a computer with the following minimum specifications:
Windows 2000/XP operating system
●
32-MB RAM
●
40-MB available disk space
●
RS-232 port connector
●
Network interface card (NIC) with a 10/100BaseT Ethernet interface
●
10/100 BaseT Ethernet, category 5 (or better), crossover cable with an RJ45 connector on
●
each end (MDI to MDI-X)
CD-ROM drive
●
1. Plug one end of the CAT5 cable into the services access port on the media server
faceplate.
See Services laptop computer connected directly to the S8400 Media Server
2. Plug one end of the CAT5 cable into the NIC on your computer. Use a NIC adapter if
necessary.
3. Configure your network connection
IP address: 192.11.13.5
●
Subnet mask: 255.255.255.252
●
For specific information, see
Once connected, use a terminal emulation program or a Web browser to administer the
media server.
Installing and Configuring the Avaya S8400 Media Server
Configuring the network for Windows 2000/XP
Connecting to the media server directly
February 2006
on page 76.
on page 80.
75