Chapter 4: Media server configuration
After installing the Communication Manager software, you must configure the media server
using the Avaya Installation Wizard.
This section covers the following tasks:
Opening the Maintenance Web Interface
●
Copying files to the media server
●
Enabling Network Time Servers
●
Using the Installation Wizard
●
Configuring the modem
●
Note:
Make sure you have the filled-out Electronic Preinstallation Worksheet (EPW)
Note:
before beginning this process.
Note:
Make sure your networking and Web browser settings are correct. In
Note:
Appendix A: Media server
2000/XP
Opening the Maintenance Web Interface
You can use the Maintenance Web Interface to copy files from the Services laptop to the media
server, and to perform other configuration tasks.
To access the media server and open the Maintenance Web Interface:
1. Launch a Web browser.
2. In the Address field, type 192.11.13.6 and press Enter to bring up the login Web page.
Note:
The first time you attempt to log in, you get a Web page asking you to install a
Note:
security certificate. Follow the instructions for your particular browser to accept
the certificate. You can also install the certificate on your services laptop
computer by following the instructions in your browser's online help.
3. Log in as craft and use the initial craft password.
4. When asked Do you want to suppress alarms?, select Yes.
Installing and Configuring the Avaya S8400 Media Server
on page 36
on page 37
on page 38
on page 41
access, see
on page 80.
Opening the Maintenance Web Interface
on page 35
Configuring the network for Windows
35
February 2006