Specifying Whether To Enable Access Lock, The Secure Print Selection Method, Or Whether To Enable A Password Rule - Konica Minolta bizhub 362 User Manual

11
Specifying whether to enable Access Lock, the Secure Print selection
method, or whether to enable a password rule (mode 469)
Specify whether to lock access if the password is entered incorrectly, specify
the selection method to check a Secure Print, or specify whether to apply a
password rule.
Settings at the time of purchase
Bit
Setting
Specifying the settings
The grayed out cells are the settings at the time of purchase. The reference
pages for each function are shown in the far right column.
Bit
7
6
5
4
3, 2, 1, 0
11-26
Description
Specify whether to
lock access when a
password (account
track and administra-
tor passwords) is en-
tered incorrectly three
times.
---------------------
Specify the Secure
Print selection meth-
od.
For security, specify
whether to apply a
password rule.
---------------------
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Setting Description
0 Does not lock access
1 Locks access
0 * Do not change this bit
when specifying settings
for this function.
0 Specifies the ID and pass-
word, and displays the cor-
responding document list.
1 Displays the document list
with an ID and enters the
password when specifying
the operation.
0 Do not apply a password
rule
1 Apply a password rule
0000 * Do not change these bits
when specifying settings
for this function.
Various settings
Page
Refer-
ence
p. 11-92
----------
p. 11-90
p. 11-85
----------
bizhub 362/282/222