Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation
WAN IPX Bridge/Triggered
Write security: 2; Read security: 5
When set to Yes, only IPX RIP and SAP updates are sent when the
routing or service table has changed. When set to No (def), updates
are sent at the same rate set for the Ethernet port (see IPX/RIP Timer on
page 3-22 and IPX/SAP Timer on page 3-23).
Bridge/Spanning Tree
The Spanning Tree Algorithm and Protocol ensures a loop-free topol-
ogy and provides redundancy. The protocol parameters can be spe-
cifically tuned from their defaults, though most applications require
no adjustment.
Spanning Tree/Mode
Write security: 2; Read security: 5
When the mode is set to On, the Express L128T S/T participates in the
Spanning Tree Protocol between other bridges. When Off (def), all
bridge ports remain permanently open for forwarding.
Spanning Tree/Priority
Write security: 2; Read security: 5
This assigns a priority to the Express L128T S/T that permits the rela-
tive priority of multiple bridges to be managed. The range is 0 to
65535 with a default of 32768.
Spanning Tree/Maximum Age
Write security: 2; Read security: 5
This is the timeout value used by the Express L128T S/T to test against
the root device. The value is in one-tenth seconds with a range be-
tween 60 (6.0 seconds) and 400 (40.0 seconds). The default is 200 (20.0
seconds).
3-26
Express L128T S/T User Manual
61202070L3-20
Advertisement
Table of Contents
Troubleshooting
