Configuration/Connection List - ADTRAN Express L128T S User Manual

Chapter 3. Terminal Menu Operation
Src Socket Comp Type of comparison that is performed:
Dest Socket
Dest Socket
Comp
Type
Type Comp

Configuration/Connection List

The Express L128T S/T uses the Connection List to specify the profile
each user or group of users are to have when connected. Each profile
or item in the Connection List has many configurable parameters giv-
ing high flexibility on a per-user basis.
Up to 15 profiles can be defined in the Connection List. Calls cannot
be originated or answered unless a Connection List profile is defined.
The Express L128T S/T factory defaults with one profile called DE-
FAULT. This profile is used for any incoming calls when Configura-
tion/Security/Authentication = None or when the username of the
connecting PPP peer is not found in the Connection List.
3-36
= means socket equal to
Not = means socket not equal to
> means socket greater than
< means socket less than
None - no comparison is done on source
socket
16-bit value which is the destination socket.
Range is 0-65535.
Type of comparison that is performed:
= means socket equal to
Not = means socket not equal to
> means socket greater than
< means socket less than
None - no comparison is done on destination
socket
8-bit value which is the IPX type
Type of comparison that is performed:
= means type equal to
Not = means type not equal to
> means type greater than
< means type less than
None - no comparison is done on IPX type
Express L128T S/T User Manual 61202070L3-20