Upgrade/Status; Upgrade/Start Transfer; Upgrade/Abort Transfer; Upgrade/Tftp Server - ADTRAN Express L128T S User Manual

Upgrade/Status

This appears when TFTP is used. It displays the status of the transfer
as it happens. Any error or success message will be displayed here.

Upgrade/Start Transfer

This activator is used when the configurable items in this menu are
complete.
Once started, the Express L128T S/T will prompt for erasing
the flash. When the flash is erased and the upgrade transfer
fails, do not turn off the unit. Retry the transfer until
successful. Otherwise, if power is removed before upgrade has
finished, the upgrade will have to occur from the maintenance
port using XMODEM. If this happens, set a PC terminal
emulation program to 9600 baud and attach to the Express
L128T S/T's maintenance port. Press Return to display a
simple terminal menu for upgrading. This menu appears
when the flash code has been erased or is corrupt. The menu
will also appear if you power up with switch 1 in the UP
position.

Upgrade/Abort Transfer

Use this activator to cancel any TFTP transfer in progress.

Upgrade/TFTP Server

Setting this to Yes allows another Express L128T S/T to upgrade its
code using TFTP client. This, in effect, turns on the Express L128T S/T
TFTP server function and allows its code to be "cloned." Setting to No
(def) will deny any request from TFTP clients.

Utilities/Exit

Write security: 5; Read security: 5
Activating this feature will exit the terminal session from the mainte-
nance port or telnet. It is equivalent to the key combination Control L.
61202070L3-20 Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-81