Table of Contents
Advertisement
Spanning Tree/Hello Time
Write security: 2; Read security: 5
This is the time between the generation of configuration BPDUs
(Bridging Protocol Data Units) by the root bridge. The value is in one-
tenth seconds with a range between 10 (1.0 second) and 100 (10.0 sec-
onds). The default is 20 (2.0 seconds).
Spanning Tree/Forward Delay
Write security: 2; Read security: 5
This is the time spent in the listening and learning state while moving
from the blocking state to the forwarding state. The value is in one-
tenth seconds with a range between 40 (4.0 seconds) and 300 (30.0 sec-
onds). The default is 150 (15.0 seconds).
Spanning Tree/LAN Port
The path cost and priority parameters for the Ethernet port are speci-
fied under this menu.
LAN Port/Active
Write security: 2; Read security: 5
The Ethernet port can be disabled when set to No. In this mode,
no bridge traffic will be forwarded in or out. Setting to Yes (def)
allows the port to participate in the spanning tree topology.
LAN Port/Path Cost
Write security: 2; Read security: 5
This is the cost of using the Ethernet port in the total cost of the
path. The range is from 1 to 65535 with a default of 100 (for 10
Mbits/second).
61202070L3-20
Express L128T S/T User Manual
Chapter 3. Terminal Menu Operation
3-27
Advertisement
Table of Contents
Troubleshooting
