ADTRAN Express L128T S User Manual page 161

Appendix B. Log Messages
no rip - rip tasks could not start
out of memory - out of available memory
out of TCP ports - all TCP ports are used up
unknown error - unknown fatal error has occurred
Set timer error - Cannot set real time clock
Software Watch Dog Reset - Software watchdog was not updated
Probe: all ports busy
level 3
All ports were busy when it was time to probe. An attempt will be
made on the next probe interval.
Probe failed
level 2
An attempt to connect to a probe site failed.
Probing <name>
level 4
The Express L128T S/T is making an outgoing call to the destination
specified by the description in the Connection List in order to get an
update on routes.
POTS call bump
level 4
The Express L128T S/T has dropped bandwidth on an existing data
call so that a POTS call can be connected.
Retrieved <number>
level 5
The Express L128T S/T has retrieved a previously held call. If no call-
er ID is available for the ISDN line, then <number> will be blank for
incoming calls.
61202070L3-20 Express L128T S/T User Manual B-15