Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation
only if the DEFAULT profile has nothing in the Rx Username param-
eter. During an outgoing call, this username does not have to match
the username reported by the PPP peer.
Authentication/Rx Password
Write security: 0; Read security: 1
This is the password or secret that is used to authenticate the PPP peer.
This is only necessary when Configuration/Security/Authentication
= Connection List.
Authentication/Caller ID
Write security: 1; Read security: 3
Incoming calls can be verified using the ISDN supplied caller identifi-
er when this is set to Yes. When set to No (def), the caller identifier is
not checked.
Authentication/Call ID 1
Write security: 1; Read security: 3
The caller identification from the ISDN incoming call is compared to
this number, starting from the right digits.
Authentication/Call ID 2
Write security: 1; Read security: 3
The caller identification from the ISDN incoming call is compared to
this number, starting from the right digits.
Connection List/IP
The IP menu contains the parameters for exchanging IP data with the
PPP peer. Static routes can also be created from here for IP dial-on-de-
mand applications.
61202070L3-20
Express L128T S/T User Manual
3-41
Advertisement
Table of Contents
Troubleshooting
