Chapter 3. Terminal Menu Operation
Security/When
Write security: 1; Read security: 2
The Express L128T S/T can be configured to authenticate the PPP peer
(using the above method) for incoming calls using Answer Only (def),
or for outgoing and incoming calls using Originate and Answer.
Security/Radius Server
The parameters for the radius server are configured in this menu. The
RADIUS server can be used for authenticating a PPP peer (if defined
under Security/Authentication) and for Telnet server sessions.
Radius Server/Primary Server
Write security: 1; Read security: 2
This is the IP address of the first RADIUS server that the Express
L128T S/T should attempt to communicate with when authenticating
a PPP peer.
Radius Server/Secondary Server
Write security: 1; Read security: 2
This is the IP address of the back-up RADIUS server that the Express
L128T S/T should attempt to communicate with when the primary
server does not respond.
Radius Server/UDP Port
Write security: 1; Read security: 2
This is the UDP port that the Express L128T S/T should use when
communicating with the RADIUS server. The default is 1645, which
is the commonly used port.
61202070L3-20
Express L128T S/T User Manual
3-31