ADTRAN Express L128T S User Manual page 151

Appendix B. Log Messages
PAP authen failed
level 3
The PPP peer has rejected the Express L128T S/T's username and/or
password used for authenticating. Check to make sure the Configu-
ration/Connection List/Authentication parameters Tx Method, Tx
Username, and Tx Password are correct.
Peer failed CHAP authen
level 3
The PPP peer's reported CHAP username and/or password does not
match the Express L128T S/T's parameters. This is most likely caused
by PPP peer sending an incorrect username and/or password. Make
sure the Configuration/Connection List/Authentication parameters
Rx Username and Rx Password are correctly entered. Also, if using
RADIUS, ensure that the server is configured and running properly.
Peer failed EAP authen
level 3
The PPP peer's reported EAP username and/or password does not
match the Express L128T S/T's parameters. This is most likely caused
by PPP peer sending incorrect username and/or password. Make
sure the Configuration/Connection List/Authentication parameters
Rx Username and Rx Password are correctly entered. Also, if using
RADIUS, ensure that the server is configured and running properly.
Peer failed PAP authen
level 3
The PPP peer's reported PAP username and/or password does not
match the Express L128T S/T's parameters. This is most likely caused
by PPP peer sending incorrect username and/or password. Make
sure the Configuration/Connection List/Authentication parameters
Rx Username and Rx Password are correctly entered. Also, if using
RADIUS, check that the server is configured and running properly.
61202070L3-20 Express L128T S/T User Manual B-5